The MKS-135TL hard drive rack from Kingwin is a stark contrast from older models that have been in the market. Its trayl-ess design is an upgrade from previous models that required mounting hard drives into trays before placing them into the drive bay. The trays were the reason for restricted cooling that most users experienced when using the older removable bays. You can fit a 3.5” SATA HDD directly into the drive bay and it will still work perfectly making it a cut above the rest in its category.
Performance and Efficiency
The performance of this tray-less drive bay is unmatched when compared with others in its category giving users many reasons to purchase it. Swapping of drives on this rack is possible and this can be done quite easily because of its hot swap feature. The inclusion of this design allows drives with large or small amounts of data regardless of the operating system to be accessed or transferred so as to enjoy the full benefits of the tray-less rack. The power and data signal connector, which are 15 pin and 7 pin respectively makes the Serial ATA drive bay, superior when it comes to performance when connected to electricity.
For those looking for efficient drive bays for their home or office functions, the MKS-135TL is all you need. This drive bay has been specially designed to accommodate transfer rates of up to SATA III 6GBps and has a serial ATA interface making its performance one of the best. Most times, proper use of this feature ensures that the rate at which data is transferred marches that of its interface. In addition, it can also support half the height of the HDD.
You will find that the exterior part of the rack has also been designed to complement its functionality. It has an HDD display and a power gauge mechanism that are mounted on an LED screen. The lights for to indicate that the drive bay is in use are blue, to indicate that power has been turned on, and a purple blinking light for HDD activity. Its open design ensures that air can easily circulate in the drive bay which prevents hard drives from heating up when in use. To prevent unauthorized removal, the rack has a triangular lock whose mechanism is built for the benefit of users.
The MKS-135TL is very easy to maintain especially if it has been used as instructed when it comes to replacement or rebuilding of hard drives. You only need to insert it into the rack, either rebuild or repair it, and soon you will be on your way within the shortest time possible. The fear of losing data is eliminated when working with this hard drive rack.
- Model: MKS-135TL
- Triangular key lock
- Aluminum bezel
- Power & HDD LED activity
• Power On : Blue
• HDD Activity : Purple blinking
- 12V fan 2 pin power output jumper
- 15 pin Serial ATA power connector
- 7 pin Serial ATA data signal connector
- SATA 6 Gbps support
- Tray-less design
- Fits 3.5” SATA HDD
- Support half height HDD
|Suitable hard disk type:||1.0″ or 1.6″ height, and 3.5″ HDD|
|Max transfer rate:||Up to 6 Gbps (SATA III)|
|PC assembly:||Fit 5.25” half-height front bay slot|
|Security key lock:||Yes|
|Connector:||NSS (Non-Scratch SATA)|
|Tray material:||Aluminum / Plastic|
|Dimension:||179(L) x 146(W) x 42(H) (mm)
7″(L) x 5 3/4″(W) x 1 5/8″(H) (in)
|Weight:||0.30 Kg / 0.65 Lbs|
|Operating Temperature:||0ºc to 55ºc|